Crane Transport Services

 

 

Picture is not of the actual unit but it is the same as this one in its type and size and it is sat on a similar frame. Does not need to be covered as it is for complete restoration. No preference on vehicle / trailer type.  

 

 

 

 

 

 

 

 

These towers are heavy 895KG each (Approx) and will need a HI ab crane to load and off load. The lattice sections are approx 6 Meters long and the bottom section measures approx 40cm across each face of the equilateral triangle. The base post is around 120cm square at the very bottom. I have estimated the overall length with the lights. The actual tower sections are 6M in length but with the addition of the base post and lights I have added the additional 2.5M length to provide a reasonably accurate guide to their length. Site access is good. PPE will be required when at site  

 

 

 

 

PARCEL WILL HAVE DELIVERY ADDRESS'S ON IT, AND PUT OUT SIDE UNDER SHELTER.  

Lift size is 4.1 m long by 1.8m wide by 0.25m when in lowered position. There are alos some accesorry not shown in picture with the lift. These are smaller and can be placed ontop of the lift. Over all weight approx 1 to 1.5 tonnes. Forklift will be avaiable to load and unload at pick up and destination.  

2 people can pickup each piece 1x lift . will need a trailer . Then lifted on.Disassembled ready for collection overall length 4500mm, overall width 2672mm, overall height 2000mm 2 people can pickup each piece  

615kg, its 225x150x170 (HxWxD) Pickup from CB9 7SJ, delivery to BL3 6ND  

 

 

Not sure about weight or size... making my guess from the pictures