Advance Boat Shipping Services
Compare Quotes & Save Up To 80%
Recent Listings
We are going to Lake Travis outside of Austin. We will be there from September 17-20 and are seeking information on the cost to have our boat picked in Phoenix, brought to Lake Travis and then delivered back to Phoenix. Please contact via email at[contact information removed for your privacy and protection - uShip is a public site and all communication shared within is visible to anyone. Once booking is completed, contact information will be shared privately between both parties] Thank you in advance.
Phoenix, AZ 85020 USA
Austin, TX 78701 USA
My understanding is Michigan won't be open for this kind of delivery until the 28th - delivery can't be until 28th. I need to book a flight to be there to accept delivery so will need advance notice.
Boca Raton, FL 33432 USA
Detroit, MI 48236 USA
Former O&O Superload Permit Agent is new owner and can assist with DOT if necessary. We are interested in moving this 95 Long by 20 Wide Houseboat a.s.a.p. Time is of the essence, so I would respectfully request: Serious & Reasonable Inquiries Only Please.
Additional information may be seen at: [website URL removed]. This is a 100 miles or less move from Lake Granbury, Tx to Lake Lewisville, Tx.
Thank you in advance for any assistance.
Granbury, TX 76048 USA
Lewisville, TX 75077 USA
OK.. I bought the boat. I need to move it now. The fly bridge will have to be removed to be able to get it under hieght. At the top of radar mast, it's a little over 14'. Removing that and the flybridge will get it down to around 12' from the payment up as it sits. the marina has a crane to sling onto trailer, and I will cover that cost, and I will come down and remove the radar mast and/or flybridge before transport (if needed). Title says 32ft, however from tail to nose, it mesures 28', and 11' 10" wide at the rear. Target date to be moved is the end of this month. Thanks in advance. Also I can barter with some computer work or componants also... I work for a small computer shop in Kennewick.
Reedsport, OR 97467 USA
Kennewick, WA 99336 USA
2007 Meridian 459 47' 8" (14.5m) long 14'4" (4.4 m) Beam 3'10" (1.2 m) Draft Bridge Clearance 14'4" (4.4 m) above water level 330 gal (1 249 l) Fuel Capacity
90 gal (341l) water capacity, 55 gal (208l) holding tanks capacity, Dry Weight 30 700 lbs (13 925 kgs)
This craft will be prepared for road by removing the bridge equipment to reduce height for road transport.
Are you able to make a shipping contact through port of Savannah, GA by requesting for timber cruddle to be constructed before you arrive with the boat from Chattanooga TN to avoid double handling at the port.
This boat is to be shipped to Port of Fremantle, Western Australia. I understand there are some competetive rates are being offered by shipping companies for cargo which is booked in advance we have maximum of 80 days to depart from the shores of USA as this ie tax exampted export.
are you able to complete the total shipping ?
[phone number removed NOTE: Once a bid is accepted, both parties’ contact info will be exchanged. – uShip]
Chattanooga, TN 37402 USA
Brunswick, GA 31523 USA
I am looking to have this taken care of within the next month or two. The sooner the better!
If there isn't capacity for both boats, please quote each separately, or just the Nautique. I would imagine the canoe would fit in or on the boat/vehicle somehow. I do have the carrying pads and straps to tie down the canoe to a vehicle with racks.
This is not a recent purchase, just looking to get the rest of my "stuff" from Michigan to Washington. These items are currently near Alger, MI, but can (or will) be relocated to the zip code I entered (48362 - Lake Orion, MI).
Thank you in advance for your quote.
Best Regards.
Lake Orion, MI 48362 USA
Renton, WA 98059 USA
I am talking with a few parties about getting a boat within the specifications mentioned for transportation to CT. I am looking for a high performance fresh water vessel for which Phoenix is well know and while exact boat has not been identified the specs are going to be close to waht is described. I am looking to determine as accurately as possible the shipping cost in order to determine the feasibility of said and what can be offered. Thanks in advance for taking the time to quote and offer direction.
Phoenix, AZ 85007 USA
Westport, CT 06880 USA
I purchased this boat from a dealer in Titusville FL and want it shipped to Red Wing MN which is near to where I live. I am seeking a reputable shipment company that can get it to me in this pricerange and delivery timeframe. The dealer that has the boat will require 24 hours advance notice on a weekday to have the boat ready for shipment pickup. I am willing to entertain your shipment offer if it meets these requirements and plan to be at the pickup location when the boat arrives. I do look forward to your early response!
Titusville, FL 32780 USA
Red Wing, MN 55066 USA
This is a 2003 Rinker 212 Captiva. sitting on a 2004 Aluminum Tandem Axel 'Performance Trailer'.
This Boat was originally listed early August, before final sale(and was delayed). The TRAILER was recently serviced, and this BOAT is NOW ready to Ship. The boat can ship anytime after Friday 9/5. However, the pick-up time would have to be arranged in advance.
Ocoee, FL 34761 USA
West Chester, PA 19382 USA
I indicated that the boat was 9' tall. It was just an estimate.
Port Washington, NY 11050 USA
North Kingstown, RI 02852 USA
We are moving to Las Vegas. This boat is going to Lake Mead Marina on Lake Mead in Boulter City. We are not moving until spring so I do not need this boat moved until then. I am now doing the preliminary arragements. The top will be removed and the boat will be shrink wrapped. If this is too early in advance to make arragements for the shipment, let me know.
Rochester, NY 14622 USA
Boulder City, NV 89005 USA
Request transport pickup week of 7/9/2012. Dimensions of boat (including trailer):from hitch to end of motor) is 23'6"; Width is 7'6"; Height is 6'. Willing to travel up to 30 min from pickup location and 1hr30min from delivery location to reduce cost of transport (for unloading). Boat is on trailer, but would prefer to be placed upon flatbed type trailer for transportation (to reduce wear on my tires / axle). Notify in advance if fuel needs to be purged from tank prior to transport.
Biloxi, MS 39351 USA
Harrisburg, PA 17109 USA
This pontoon boat and motor is on a tandem axel trailer which I would like shipped to Dunseith, North Dakota which is a USA-Canada border crossing where I will pick the boat up. As such I would need advance notification of the date and time the boat would arrive in Dunseith.
Gainesville, GA 30501 USA
Dunseith, ND 58329 USA
Boat needs to be picked up on July 13, 2012 and delivered by July 18, 2012
there is no trailer.
Pick up location is [address removed] in Old Saybrook Conn., and Delivered to [address removed] in North Lake Tahoe Ca.
Boat will be loaded and unloaded with sling lifts.
Thanks in advance.
Old Saybrook, CT 06475 USA
Tahoe City, CA 96145 USA
Do not bid if you require any $ in advance, COD only.Bearings will need to be greased,storeage yard says trailer looks good,but I am unable to view and confirm. Very light boat,no motor, 1500lbs. including trailer.
Kingman, AZ 86401 USA
Port Angeles, WA 98363 USA
can be delivered any time after pickup with 2 hrs advance notice.
Lake Worth, FL 33461 USA
Fort Worth, TX 76107 USA
I can be reached anytime on my cell [phone number removed]
This is a small light bayliner. Tires in good shape. I will pay cash for a better rate. Thanks in advance
Euless, TX 76039 USA
Carson, CA 90746 USA
So, the boat is 2004 Sea Ray 240 Sundeck.
It DOES have a trailer, the trailer is new, 2014 built, spring axle, 2inch ball, tandem two axles, aluminium, on bunk support not rollers, lights working, brakes would be disc brakes on 2 wheels.
Boat is a normal 2004 Sea Ray 240 Sundeck, its a well known make and model, the top of the boat is not high, the middle part is not sticking up.
DATE: Date can be scheduled, notified 2-3 weeks in advance.
A Ford F150 or F250, would easily pull this boat.
Thanks,
Kenan
Tampa, FL 33602 USA
Sterling Heights, MI 48313 USA
Flexible on the timing of the shipment. Boat is at marina in dry dock and will be delivered to a facility that can off load. Thanks in advance
Lake Norman of Catawba, NC 28682 USA
Galveston, TX 77550 USA
*** I am willing to meet transport in North Fl. Or possibly in GA. to help get this done. I'm aware not a lot of jobs into central Fl right now. Pls bid accordingly....There is NO motor/drive system in boat, making this a perfect back haul. There will a Bimini top, full mooring cover, that will be place forward in the bow. Ratchet straps must be used on both sides to secure transome to trailer. Most of all, enjoy the trip!!
Pls, no negative comments about the price. This is a ministry project boat. Thx in advance, be blessed, Dean.
Henderson, NV 89015 USA
Melbourne, FL 32940 USA
Require Local tow away from Advanced Marine, 6016 SE 111th Av Portland OR 97266 to Port of Vancouver 2985 NW Harborside Drive Vancouver, WA 98660. Sales from Port on 22 February.
Boat will be shrink wrapped ready for shipping.
It is on a new trailer, BUT is built to Australian regulation.
Must have TWIC card for port access, and be able to tow unregistered trailer with 50mm tow hitch.
Also must be insured.
Portland, OR 97266 USA
Vancouver, WA 98660 USA
I am looking for someone to transport a 25ft SunTracker pontoon boat to Lake Havasu City, AZ. The boat is on a trailer. Thanks in advance!
Thousand Oaks, CA 91362 USA
Lake Havasu City, AZ 86403 USA
YOU DO NOT HAVE TO GO THROUGH NYC!!!!BRIDGES ECT. !!!!!!! THE PORT JEFFERSON FERRY TO BRIDGEPORT CT. ACCEPTS THAT LOAD(() I CHECKED WITH THE MANAGER IN PERSON NOT ON THE PHONE))(( TWO OF THEIR THREE VESSELS WILL CARRY THAT NO PROBLEM over 55' flat rate $185. Less if shorter. !!!with a reservation 2 days in advance (preferably on week day but not required) that makes it 110 miles driving. on blocks the way it should at a marina. clean shot to her. Full semis do get in here but a full sleeper rig and large 40' +trailer would be tight to get trailer in straight. Was delivered by stub nose and a 35'er. No problem. There is a forklift that can manuver trailer under if needed and then you could hook back up and pull out. I need to be able to put back on blocks at destination without use of forklift ( lift trailer ) ?? Tricks of the trade?? Don't care how as long as it works. Looking for bids under or close to $1000 20sev. 241 475four
Seaford, NY 11783 USA
Suffield, CT 06093 USA