AFFORDABLE VEHICLE PARTS SHIPPING SERVICES
Compare Quotes and Book Online
Recent Listings
Pick Up And Deliver One59desoto Parts Car. The Car Has No Drivetrain But Has Four TIRES And Rolls And Steers No Special Requierments For Ride, Car Can Be Carried In A Open Trailer Uncovered
San Francisco, CA 94124 USA
Tucson, AZ 85711 USA
2/7/2006
$700.00
This is a cab from a 69 Chev. truck. cab only no other pieces
Whittier, CA 90606 USA
Cedar Hill, TX 75104 USA
2/4/2006
$400.00
1985 Jeep CJ7 rolling frame w/engine
Rockledge, FL 32955 USA
Chesapeake, VA 23322 USA
2/1/2006
$525.00
palletized auto roof
Phelan, CA 92371 USA
Winchester, VA 22602 USA
1/26/2006
$350.00
Motor will be packaged and ready for pickup at residential address in Southold, NY to be shipped to Holly, MI. Dimensions are approximate and may vary slightly. I have already won the auction and am now trying to arrange shipping. Thanks!
southold, NY 11971 USA
Holly, MI 48442 USA
1/25/2006
$200.00
1 Ford truck cab. 60x60x72 wgt 350. Misc parts, 1 hood, 2 fenders, 1 tailgate, grill pieces. Total wgt about 250. Please note, NOT A WHOLE TRUCK. Would fit on 1 pallett, and other parts on another. Seller, has no pallets. But will deliver to freight company in 40504 area code, going to 53589 area code. A lift gate needed.
lexington, KY 40504 USA
stoughton, WI 53589 USA
1/19/2006
$300.00
I have an engine that I can't haul. I need this hauled from Tipton, IN to South Bend, IN. Its about a four hour drive. This guy needs it soon.
Tipton, IN 46072 USA
South Bend, IN 90210 USA
1/14/2006
$50.00
I'm looking for someone to transport a 1967 Volkswagen Beetle shell that I had bought. I'm on a budget for cost.
Redding, CA 96002 USA
Northbrook, IL 60062 USA
1/14/2006
$500.00
This is just an engine for a Suzuki TL1000R Mortorcycle.
Charlotte, NC 28201 USA
Fort Belvoir, VA 22060 USA
1/12/2006
$100.00
This shipment consist of a i ton truck axel with springs that i bought on line .
I just need some one to transport it to me
at my location or a meeting place in Portland ,
Oregon
Romulus, MI 48174 USA
Clatskanie, OR 97016 USA
1/12/2006
$320.00
Front and Back Car Seats from a 1978 Nova. Assuming it's about 5'x2'x3' and about 100 lbs total
all estimated, of course
just want to clarify that there are THREE total pieces. One front seat and two pieces for the back seat.
i'm trying to work out shipping before purchasing this large item or having the covers removed and shipped separately
thank you.
congers, NY 10920 USA
Norman, OK 73071 USA
1/12/2006
$385.00
Rear body clip from 1957 Thunderbird. Auto Body shell part of sheet metal with some bondo and/or fiberglass surfaces.
Hilton, NY 14468 USA
Tahlequah, OK 74464 USA
1/12/2006
$650.00
This shipment will consist of a 2x2x3 boxed crate
this is out of a 1 ton pick up truck and will be sealed
in a crate.
All i need is some one to either transport it to me
from the shipper to me is all
Colombus, IN 47201 USA
Clatskanie, OR 97016 USA
1/11/2006
$295.00
Complete rear axle for 1977 MGB
Crystal Lake, IL 60014 USA
Colorado Springs, CO 80904 USA
1/7/2006
$125.00
Hi I am looking to get a Toyota 4age shipped from 48197 to 02056. It should be crated (will talk with seller about specifics) or otherwise contained at time of shipment. Approx. weight is 250lbs and dimensions 1'w 2'l 2'h
Ypsilanti, MI 48197 USA
Norfolk, MA 02056 USA
1/3/2006
$200.00
Hello,
I have a front axle from a C60 Chevy bus that I need transported from Cleburne, Texas to West Union, South Carolina. The axle is already removed from the bus and is sitting free. You can see from the pic that the tires are still on the axle so moving it by rolling it around is possible. As this is just an axle for parts the load can be uncovered and needs no special care. The dimensions and weight are approximate but it is just a regular front axle with wheels from a bus without the springs. I live close to I-85 in South Carolina.
Cleburne, TX 76033 USA
West Union, SC 29696 USA
1/3/2006
$0.42
The items to be shipped consist of three items that are from a jeep CJ7. The hard top that has been removed and 2 full steel doors. These are the three individual parts that needs to be shipped as a unit. If you make a bid please allow me at least 48 hours to respond. I am having difficulties with my internet server.
Baltimore, MD 21234 USA
Englewood Village, CO 80111 USA
12/30/2005
$500.00
Single trip shipment of boat's (Bertram 31) fiberglass Roof and Flying Bridge and aluminum Half-Tower with Hardtop (pipe frame supporting aluminum top). Picture shows Flying Bridge sitting on cabin roof, with Half-tower attached, supporting Hardtop. Roof and Flying Bridge are integral unit; tower and hardtop may (if necessary) be detached from Roof/Flying Bridge for shipment. Radar, etc. items shown on hardtop will be removed (not shipped).
Not palleted. Forklift for loading MAY be available at origin. Boatyard destination can provide mechanical unload assistance.
New Orleans, LA 70126 USA
Deltaville, VA 23043 USA
12/22/2005
$675.00
1966 GMC Truck Hood, (2) Fenders, (2) Inner Fenders, (1) Radiator Support Pane. There is not much weight here.
Weight:
The hood may weigh 75 Lbs.
The fenders weigh approximately 15 Lbs Each, Inner Fenders weigh approximately 30 lbs Each,
Radiator Support Panel weighs approximately 15 lbs.
Total Weight approximately 180 Lbs.
I could shrink wrap these parts, and or put them on a palet if need be.
I could deliver these parts for deliver within 50 miles of my location.
Marysville, CA 95901 USA
New Concord, OH 43762 USA
12/15/2005
$350.00
1966 CHEVELLE HOOD WITH A FIBERGLASS SCOOP.
MUST BE PROTECTED VERY WELL. This item can easilly be transported with other product or whatever.
CANTON, OH 44720 USA
LIVERMORE, CA 94550 USA
12/13/2005
$250.00
VW engine and transmission, either bolted to a pallet or crated.
Marietta, PA 17547 USA
Thiensville, WI 53092 USA
12/9/2005
$325.00
Completely stripped body can be lifted by two people with about 5 boxes of parts. Body is approx 8x4 feet. The body does not need covered handling however the boxes will need some weather protection. This is a 63 porsche 356 down to bare bones. Body and all boxes can be lifted by one person assisted by the person meeting the truck at pickup and delivery.
I am willing to drive within 300 miles of Columbia SC for pickup, price dependant.
Thanks for bidding, and there is no delivery timetable, it can be anytime, no hurry.
bellevue, WA 98005 USA
Blythewood, SC 29016 USA
12/8/2005
$395.00
Full front hood (used); weight 30 lbs.+
palmerton, PA 18077 USA
englewood, FL 34224 USA
12/7/2005
$108.00
Chevy tailgate with glass inside (shouldn't be a breaking hazard). Should be easy to add to any load, just need to get it here. flexible pickup and delivery
Charlotte, NC 28201 USA
Tyler, TX 75703 USA
12/5/2005
$100.00
the axles are aprox. 55'' long 14'' tall 14'' wide. They weigh about 1600 lbs combined.
alan park, MI 48101 USA
rocklin, CA 95677 USA
12/4/2005
$537.00
You just bought car parts online, now how do you ship cart parts? uShip can help you get your auto parts delivered. Our cost-to-ship index tool, above, shows you hundreds of auto parts shipments completed through the uShip marketplace. Here, you'll get a good idea of how we work and see on average what it costs to ship car parts. When you're ready to get quotes directly from service providers, you can create your listing with your specific needs by clicking the "Get Free Quotes" button on the top of this page. Be sure to provide as much detail as possible, including the dimensions and weight of your vehicle parts. When your listing is complete, you'll start receiving quotes directly from service providers bidding for your business. This will ensure you get the cheapest vehicle shipping rates. uShip also makes it easy to research each transporter's shipment history and safety records through their profile. When you find a carrier who meets your needs at a price inside your budget, accept the bid and start working directly with your provider to prepare for your vehicle parts delivery.