Ship Heavy Equipment Anywhere

 

this vehicle is non running  

 

 

 

 

 

 

Pick up has forklift to help load push up ramps on trailer. Delivery address has equipment to unload.  

 

 

 

Tractor with Frontend loader, Bush hog and box blade.  

Machine is assembled and on casters/wheels and can be rolled for loading. Enclosed transport only — box truck or enclosed trailer. Machine cannot be exposed to rain or weather. Pickup is in Chesterfield, VA, with delivery to the Atlanta, GA area. Pickup date is flexible through August 31; if not picked up by then, pickup can be arranged again approximately one week later. Seller can assist with rolling the machine to the pickup vehicle. Liftgate/ramp or other appropriate equipment will be needed for safe loading and unloading unless transporter has another suitable method. Machine must be securely strapped/braced during transport and not allowed to roll freely on its casters while in transit. Please provide proof of active cargo insurance.  

Folks, I do not know why the website declined all bids. Please place your bid again, same as it was, as I was planning to accept one today.  

 

6,200 lb Yard Ramp 6' wide x 36' long  

 

 

It will be two truckloads, one for the fiberglass poles and one for the steel poles. Light Poles, 25ft - 35ft, Unused, Qty 50 Lot Includes: QTY 15 -- LIGHT POLE, TENON TOP, DIRECT BURIED, 35FT L, BLACK RAL 9017, FIBERGLASS, TAPERED,R OUND, 3IN OD TENON, 8.5IN DIA BASE, 5FT EMBEDMENT (ID 214313) QTY 15 -- LIGHT POLE, TENON TOP, DIRECT BURIED, 25FT L, DARK BRONZE, FIBERGLASS, TAPERED, ROUND, 3IN OD TENON, 8.4IN DIA BASE, RAL8019 (ID 214358) QTY 13 -- LIGHT POLE, TENON TOP, DIRECT BURIED, 25FT L, BLACK RAL 9017, FIBERGLASS, TAPERED, ROUND, 3IN OD TENON, 8.4IN DIA BASE (ID 214357) QTY 7 -- LIGHT POLE, DAVIT, FOUND MOUNTED, 30FT HOT DIPGALVANIZED, STEEL,TAPERED, ROUND, 12IN BOLT CIRCLE, 1IN ANC BOLTS 0.14IN/FT TAPER (ID 67541) Seller will load  

 

 

Expectation: Full RGN with upper and rear decks. 30’ well preferred. Standard width. Start: [ADDRESS REMOVED] Mayville, WI 53050 To: [ADDRESS REMOVED] Charlotte, VT 05445 What is it? Three assemblies. A)5130M John Deere Tractor with 60F Header and rear hopper a.14,740 lbs (est), with header and rear hopper assembly b.30’ 6” long (can raise rear hopper up on rear deck some if needed c.7’ 2” (86”) wide d.11’ tall (when folded down. We will fold down spout on top of tractor cab and rear hopper closes up and lowers) B)Celikel Corn Header Challenger 2 a.2,700 lbs b.5’ 4” (64”) wide c.12’6” long (can overhang main deck) d.9’ total height C)Loader Frame a.2,200 lbs b.4’ 6” (54”) wide c.4’ 6” (54”) tall d.10’ long e.We will set bucket in middle of loader frame and secure it. Total load weight: 19,640 lbs We have cranes and equipment to load this all. We will disassemble whatever we need to make it a legal height load (13’ 6” or less) as long as the belly of the RGN is 30’ long, 18” tall (approx), and the RGN has a rear and front deck.  

It runs and is on the ground, wheels are in a tricycle formation, front tire in center.  

I have a 6' box blade. I would like to go with it if the price is not too high. Attached is a 6' cutter.