Cheap Stove Shipping Services

 

The stove is presently not packaged for shipping. We're providing the image of the appliance so that you know what you're transporting. We will place the appliance on a pallet so that none of the stove parts overhang the pallet. We will shrink wrap, blanket wrap and re-shrink wrap the stove before strapping it to the pallet for transport. The stove can be moved with a pallet jack or with a forklift.  

10 x 10 storage locker only filled to 4 ft in height with washer, dryer, stove, long dresser and several large misc boxes. Less than an hour load time. Everything is boxed up.  

 

 

 

 

 

 

No steps or stairs to load, no steps or stairs for delivery. Timeframe for pickup and delivery is very flexible.  

 

Stove needs to be palletized and crated  

This fully restored gas range need s ride back home to Chassell, Michigan. Long way home! Any offers?  

 

This 1924 Wincroft gas stove has been fully restored and needs a lift home to Murray, UT  

This 1960's Chambers gas range has been fully restored and needs a lift back home to Otis, OR, just outside Seattle, WA.  

 

This 1952 O"Keefe & Merritt gas range is currently in the garage of a customer in Phoenixville, PA. We need it to be picked up from there and delivered to our facility in Georgia. The stove is currently disconnected and partially wrapped, but it will need to be fully blanket and shrink wrapped to secure any loose parts like knobs or burner grates. No stairs involved, so with a set of appliance hand trucks you can easily roll it out of the garage and into your truck or trailer. We'll handle off loading when it reaching our location in Georgia.  

https://www.ajmadison.com/cgi-bin/ajmadison/WGE555S0BS.html (specs have been rounded up where they are partial inches, complete specs are available on this website if needed).  

This 1936 Chambers gas range is a classic...and it's beast! Weighing in at right at 900 lbs., this stove will require extra manpower to load. Currently in a residence in Punxsutawney, PA., we need to have it picked up and transported to our facility in Georgia. UPDATED INFORMATION: This stove is located in a garage and can be rolled out of the garage and into your trailer on a set of rollers that were made by the customer. You cannot keep the rollers. If you have a trailer with a drop ramp, it should just roll right out of the garage and right into your trailer.  

This 1956 GE refrigerator and matching GE electric stove are in a home in Cincinnati, OH (45239). The home is being sold and we're going to buy these two appliances. They will need to be picked up from the home in Cincinnati, OH and delivered to our business location in Clayton, GA (30525)This is a home that is being sold by the family estate and they are just cleaning out the house. They are not able to assist in loading the appliances so the hauler will need to provideadequate manpower and/or appropriate appliance hand trucks for moving.  

We have two (2) of these small 20" apartment sized stoves that need to be transported back to their home in Hazelhurst, MS. Both stoves are from the 1950's and have been fully restored to "like new" condition. Upon delivery to the residence in MS, the stove need to be taken into the home, unwrapped and set in place. The homeowner will be responsible for final installation. The home owner will not be able to assist with unloading or moving the appliances, so please be sure that you have adequate manpower or appropriate appliance hand trucks with you at delivery. There are 5 steps from the driveway to the kitchen door entrance on the backside of the house.  

This 1949 Caloric gas range has been fully restored and needs to be delivered back to its home in Philadelphia, PA. We will have the stove shrink wrapped, blanket wrapped and shrink wrapped, again and ready for pick up from our business location in Georgia. We will gladly load or assist in loading the appliance. Upon delivery to the owners home in Philadelphia, the stove will need to be taken into the home, set in place, unwrapped and all packaging removed from the premises. The receiving customer is not expected to assist with unloading and getting the appliance into the home. Please be able to provide adequate labor as well as appropriate appliance hand trucks to move safely move the appliance into the home.