Business & Industrial Goods Shipping Services

It weighs 190 lbs and has dimensions of 30x28x26 it will be wrapped in plastic and bubble wrap. So there will be no loose items. The shipment may also be seperated into two packages of 95 lbs each with the same dimensions.  

consists of the following: 4-25' long I beams 10 - 10' I beams 3-15' bridges misc. hardware will be loaded and unloaded by forklift would like tarped for shipping  

I need these brought from Oak Ridge, TN to Austin, TX. The total lot is 4 55-gallon drums, approx 22.5" in diameter and 35" high.  

Small backhoe attachment needed to pick up in Greenup KT and Deliver to Burlington, CO. This item in not palletized so a flat bed of sorts would work best unless you would have room in back of trailer. Weighs around 1000-1100 lbs Hoping to get this done in the next week. Please call Landon for any details regarding this item. [phone number removed]  

350 lbs, on wheels 5'6" high, 3' deep, 4' deep. Will be able to load and I can attach to a pallet if it would help. I have already received a quote of $650  

This is one piece of used lab equipment. It is a rectangle - like a small refrigerator. It is on wheels. It is 44" high, 25" wide and 29" deep. Weight is about 250 pounds. It is not on a skid and is not wrapped, but I can put it on a skid and / or wrap it before shipment if needed.  

This is a commercial dishwasher that will be crated up. The machine weighs 190 lbs. It will have no hazardous materials with it. I will require 0 people to help unload it. We have a loading dock at the drop offl location. I am not sure about the pick up location. I do not require the move to happen in one trip.  

these axles need to be picked up from orange ca 92866 and shipped to memphis tn 38127. this is for the axles only no tires or leaf springs. i would like to ship them for around 150 dollars if possible. i also have an engine that needs to go to loveland colorodo and if you can do them both for the right price it will work out.  

electric motor and hoist gear drive  

One BobCat attachment. It's a Rockhound. It weighs 1060 pounds. The owner said he had a BobCat to help load it into a trailer. When it gets to us we have a BobCat that we can unload it. We laos have a lift at the destination. It's by our warehouse. The man who sold it to me said he would put it on a pallet for shipment.  

AC1 Ingersoll-Rand CFM Air Compressor Engine: John Deere Diesel Unit Weight: 2100 lbs Tires: ST17580R13 (speed rating 55mph) TIRES IN GOOD CONDITION Unit Length: 10.58 feet Unit Height: 4.67 feet Unit Width: 5 feet Fuel Tank Size: 17 Gallons Battery: 12 volt  

this is a rear end that wieghs 170 pounds. the rear end needs to be shipped to patterson ca. i also have a short block engine that needs to go to fresno which is on the way to patterson its about a 50 mile detour. i will be willing to pay 75 bucks more for the engine to be delivered. i can load them and have some one unload them.  

the lathe weighs 600 pounds. needs lift gate and needs to be crated.  

3 OR 4 BOXES OF TOOLING EQUIPMENT PROBABLY ABOUT 300# LESS THAN A CAR TRUNK FULL  

Large Machine needs a ride to GA  

60 gallon air compressor, approximately 100 lbs. Still on factory pallete. Need pick up after April 9th and delivery ASAP. I is OK to lay unit down, but, expect some of the hydraulic fluid to leak.  

Screen Printing press can be broken down to a little over 6 ft. for moving. This should be on a single pallet. Weighs between 300 and 600 pounds. I will only need one person, the driver, to help unload the item. Loading should be the same. The move needs to be done in one trip. If it was possible to not break the machine down and put on a pallet, that would be the option I would choose.  

Fully assembled, EACH patient lift weighs about 50 lbs. All three are therefore 150 lbs total. The dimensions for EACH are approximately 2' x 3.5' x 4'. They are currently waiting in warehouse ASSEMBLED and NOT in boxes or on crates. Each patient lift CAN be dismantled, however, if not, each one has a U-shaped, steel base with four wheels that CAN be locked. Attached to the base is a steel bar that is perpendicular to the base. Attached to the bar is a hydraulic piston and then a metal sling that is parallel to the base. Each lift can easily be loaded by one person. This move doesn't have to happen in one trip, but we would prefer it. **Each patient lift is similar in dimensions as the one pictured, but may be a bit different--as in manufacturer.  

Item is on rollers, not on pallette; tables are removable. Pickup from residence in Colorado Springs, CO 80908, delivery to residence in San Bruno, CA 94066. Insurance required by buyer. Please advise if item needs to be palletized/shrinkwrapped/etc. and if shipper can provide such services.  

THIS ENGINE IS AT THE DOOR. IT NEEDS TO BE LOADED WITH A LIFTGATE TRUCK OR PULLED ONTO A TRAILERS TAIL GATE WITH A WRENCH , COME ALONG OR CHAINFALL.  

Fully assembled, EACH patient lift weighs about 50 lbs. All three are therefore 150 lbs total. The dimensions for EACH are approximately 2' x 3.5' x 4'. They are currently waiting in warehouse ASSEMBLED and NOT in boxes or on crates. Each patient lift CAN be dismantled, however, if not, each one has a U-shaped, steel base with four wheels that CAN be locked. Attached to the base is a steel bar that is perpendicular to the base. Attached to the bar is a hydraulic piston and then a metal sling that is parallel to the base. Each lift can easily be loaded by one person. This move doesn't have to happen in one trip, but we would prefer it.  

A METAL LATHE ABOUT 600# FROM CLARKSBURG, MA TO OMAHA NE. CAN BE ON AN OPEN TRAILER OR IN A PICKUP TRUCK, OR?  

lift gate as removed form pickup truck  

we are shipping a portable air conditioner in a wooden crate -230 lbs. approximate dimensions are 59" high x 35" x 26" it is going from zip code 11743 Huntington, NY to zip code 37013 Antioch, Tenn.  

Stacks of wooden pallets/skids. Loading docks at both ends. Easy/fast in and out. From Detroit,Mi. 48217 to Haydenville,Oh. 43127. (252miles) one way. 53 ft. Dry Van or flatbed. Aprox. 20700 pounds. No touch freight.