Ship Heavy Equipment Anywhere

 

located at jd dealer. drop off at jd dealer. only during business hrs. no saturdays.  

 

Mower and charging station (not shown) can be transported on a small trailer or a small UHaul type truck.  

 

 

Trailer rated for 21,000 lbs. All new wheel bearings, backing plates, deck, and brakes. Has a pintel hitch, triple axel, brand new 14 ply F rates tires with 2 spares, has a valid license plate...all ready to go but our truck was unable to haul this particular load.  

 

 

 

The unit is not in a pallet and it cannot be disassembled. It needs to be picked up as is.  

There is help to detach and load the header and there is help to unload as well  

Bobcat Toolcat 5600 (4x4 utility work machine). Operating weight approx. 5,400 lbs; it runs and drives, so it can be driven on/off the trailer (drive-on, drive-off). Shipping WITH the machine is one snowblower attachment (approx. 700-900 lbs) that can ride on the deck or stay mounted on the front. Machine is fully weatherproof, so open/flatbed transport is fine. Standard tie-down and lift points available; carrier should bring chains/straps and ramps as needed. Pickup: Granby, CO 80446. Delivery: Shakopee, MN 55379. Preferred pickup date July 11, 2026. NOTE: dimensions/weight are approximate and will be confirmed before booking.  

 

 

Needs to be able to drive off and on trailer. Don’t have dock to load or unload.  

Shipper can assist loading Pickup anywhere from 9-5 Drop-off at any time Have to offload yourself.  

I need a 20 ft deck gooseneck trailer moved 30 miles + or - It will be loaded with a Kubota SVL75 skid steer, bucket and forks. I just need it towed to destination, my f-250 is dead. Pickup 1/2 way between Boyd and Azle Texas and goes to the east side of Denton on Mayhill Rd, 1/2 mile south of 380. I’m NOT paying $500 for this so don’t waste the bid it will be denied. I know how Uship works, be reasonable Or forget it. Pull up, hook on, check the chains, drive to denton, detach, done.  

 

 

 

 

Description: 2022 Yanmar VIO80-1A Mini Excavator Serial Number: YMRVIO80LNAJAJ104 Item Number: 14283908 Pickup Terms Failure to follow these terms may result in the seller turning away the attempt of your driver to pick up the purchased item(s). You will be responsible for any transportation charges issued by the provider. * Hours: null-null * You must call at least 24 hours in advance to schedule pickup * No Loading Dock, Ramps, or Forklift Available: Only RGN or trailers with ramps can be used to pick up this item at this location. Seller will not allow item to be loaded on a step-deck or flatbed trailer without the appropriate ramps. * Driver MUST bring a copy of the IronPlanet Item Release to pick the item up. * Buyer will be responsible for directly paying any and all storage fees if the Equipment has not been picked up from the Seller's location within eight (8) business days after availability of the Item Release.