Cheap Boat Shipping Services

Boat will have a cover and will be full of sporting equipment (fishing rods, wakeboard equipment, etc.  

The length and width are the boat only. I do not know the length and width of the trailer. It's just standard  

I am relisting this as I have a price I am willing to pay. I should have stated this previously. The dimensions which I listed are the dimensions as it sits on the trg. The weight may be a bit high. I overestimated it just to be safe.  

Measurements and weight include trailer and motor. Motor has a trailer position to be maintained during transport and is higher than the height provided in measurements.  

I purchased a 19 ft Tracker Walleye Boat in Eagenville ON at the dealership. I need it brought back to my house no later than Thursday Am next week.  

2013 tracker boar fresh alignment new bearings and tires  

Length of boat with trailer is 25 feet Weight of boat and trailer is 3,800 lbs. I do would rather not use the trailer used for transport but would consider Tow away if you shrink wrap the boat to protect from the elements. Would rather place boat and trailer on flat deck or contained trailer. No spare tires for the trailer as well. Width of boat and trailer is 102 inches. Boat is being delivered to makin waves marine in bancroft - 29720 hwy 62 in bancroft. Boat is being picked up at 217 graham heights, sherwood park alberta  

 

Boat is brand-new and requires proper protection for transport.  

 

 

This boat is to be picked up at Outer Harbour Marina in Toronto and taken to the Aylmer Yacht Club in Gatineau, Quebec. Timing is flexible over the next month i.e. June 15 to July 15.  

To be picked up at Mastercraft dealer Enns Brothers [address removed] Winnipeg, MB R2J 0V1 Phone: [contact information removed for your privacy and protection - uShip is a public site and all communication shared within is visible to anyone. Once booking is completed, contact information will be shared privately between both parties] contact: Andrew Service Manager in Winnipeg and delivered to Mastercraft dealer in Calgary. Would like to be picked up June 9 or 10 and delivered by June 12 or 13th  

 

water to water delivery June 2017 delivery  

The boat is 6000lbs, the trailer is solid metal and I estimate it could way up to 2000 lbs. The boat can be taken with or with out the trailer.  

Both the loading an unloading locations do not have loading docks. Carrier will need to take that into consideration when bidding. The loading location does not have a truck or a way to put onto or into trailer. The unloading location has a pickup truck and access to forklift. The boat is a wood antique. So care must be taken to tarp and protect against rain, snow etc. Boat transom may be rotten, so care is needed when bouncing motor.  

To be picked up from Bay Port Marina and launched from Barrie lake simco  

 

 

Boat will be shrink wrapped, so it is only 7 feet high. Tows with a standard 2" ball.  

 

 

Dimensions are for boat on trailer.  

No specific timeline on pickup or delivery . Boat is just sitting at relatives . When deal is made boat can be taken to marina and loaded on flatbed. Boat is currently wrapped in shrinkwrap. Trailer that boat is on has not been on highway for years so must be towed on flat deck due to aged tires and possible bearings. Trailer tongue to motor prop is 32ft . As it sits on trailer it is between 10.5 and 11 ft . Can confirm if needed. (I have had it measured and it looks like it is 10ft 6 in to the top, though that could be from the 2x2 construction for the shrink wrap). As there is no rush - pickup is very flexible, however- I am looking for cheap transport. If I cannot find something under 3 k , I am planning on going to get the boat myself and refit the trailer with new tires and bearings.