ASPHALT & CONCRETE TRANSPORT SERVICES

This will be strapped to a pallet and weigh about 2000 lbs total. This is a skid steer attachment, it is small but heavy for its size.  

 

 

we have a dock for semi unload the machine is 9ft wide but can be turned when loaded so it isnot over  

Total width 10 ft estimated 80,000 lb 42 ft long tandem with king pin in front  

The 1st item is a skid mounted Industrial Dust Collector and the 2nd item is a pallet of filters for the dust collector. Both items can be loaded and unloaded with a large forklift and the Dust collector also has lifting eyes for overhead handling. Both locations (shipping & receiving) will have the proper equipment available for loading and off loading of the items. These item are being delivered to a secure government location that will require valid picture ID for all deliery personnel and proper documnetation for the hauling vehicle and trailer. The dust collector will not require tarping but the skid of filter may require tarping to protect them during transport. These items will have to be picked up and delivered during normal working hours.  

 

have a semi dock to unload  

 

The Additional Cutter head and small conveyor comes with it.The Spec sheet shows from ground to top of stack 10'1", The tracks our 8' from outside to out, the extra cutter head can sit either at back of dropdeck or over the drives tires.  

we please need a bid for this item as well as the fastest possible load time as we would like to get this equipment home :)  

 

DELIVERY AT PHARR TX 78557 TY. YRAD WITH RAMP AND FORKLIFT  

 

 

1979 ROSCO ROLLER, 924.6 HOURS, S/N:21659, BEEN SITTING FOR 6 YEARS  

 

This is smaller paver. Approximate weight is 7 tons. Size is: 14 ft. long and 8 1/2 ft. wide. This paver is in good running order. The owner has the key and will meet you on site.  

 

 

More information about crusher in: http://www.komatsuamerica.com/crushers-BR380JG-1 from Pine Bush, New York to Hidalgo TX Zip Code 78557 we need full ensurance and move it befor december 10th  

 

 

I never weighed the unit, but the guy I bought it from said he weighed it and it was 37,000 lbs. I had a guy I know who is a truck driver and he said it would fit onto a Lowboy. It was towed 450 miles to here, but I would like it put on a Lowboy if possible to be taken to Brownsville. Here are some more measurements. It is 12' 2" at the highest point, the way it sets now. But you could lower it down about 1' with the jacks that are on it now and that should be legal for a low boy. Distance from the center of the rear axle to the 5th wheel pin is 22'. There is 3 1/2' in front of the pin. Distance from the center of the rear axle to the rear of the unit is 11 1/2' If you look in the picture at the clearance under the hopper, it's 16" The brakes work, the lights work, and if it has to be towed, I will put good tires on it. I will haul the front wheels myself. IN YOUR BID, PLEASE STATE WHETHER IT WILL BE TOWED OR PUT ON A TRAILER. One other thing, it is setting in a field now,(on the edge of a gravel drive), would you need something like a crawler to load it, or do you have a way to get it on the lowboy, like hooking up to it and backing it on.