Equipment Moving > jhon deere d2 440 dozer

Response: sooner the better snow is going to add new chalenges to moving this equipment (10/6/2008)

Response: how is the clearance? i pulled a trailer up to get the dozer and the dips in his about third mile driveway hung the trailer up i decided not to load. actualy the universe decided i wasnt going to load. the dozer had a problem that i fixed before i posted this listing now it runs but i dont want to do more than load and unload because the guy i bought it from is off grid and i need to weld half of one of the track links not enough heat to hold permitality i chained the link for extra support temperarly it monuvers and goes back and forward that is why i dont move it to the road The answer is do you have the clearance? (10/12/2008)

Response: The bed of the trailer sits 3' off the ground, but That isn't the clearance. I will have to go and check it out. What clearance is needed? I will be over that way Tuesday. to unload the load I have on the trailer now. I'd like to haul this for you but I sure don't want to get the trailer hung up. Thanks Carrie (10/13/2008)

Response: I saw your profile and the trailer is much better than mine and heaver duty i dont want to assume any thing so dont be afended i have to ask are you good at munuvering backwards and forward im not to good and i made it up and back with mine so you should be fine yours is at least 10 foot longer i understand goose neck is easier to munuver yet i havnt used one before. I dont want unnesasery chalenges or suprises for you or me. my wife looked at your profile and agreed your trailer will work. dont hesitat to ask any question no matter how silly it may seem it may be or lead to something important (10/13/2008)

Response: Thanks for your quick reply. I have asked my son to come with me so that I can make sure that I have the best person to get the trailer moved backwrd or forwards as needed. He wants to put the feet of the ramps on angle iron so the ramps can slide a bit as needed as we are loading the cat. Because of the cat being on tracks it will roll up quite a bit before it tips down and settles on to the bed of the trailer. When it tips down and settles down on to the trailer it will push the trailer down. At that time the ramps need to be able to slide a bit. We have the angle iron we just need a place to cut it in the lengths that we need. Do you know of such a place over in Spokane? Perhaps you might even have a way to cut the angle iron. We will be unloading this bus in Spokane tomarrow and if we can get this angle iron cut we will be right there to pick up your cat. if you decide to have us haul it for you. Hope to hear from you soon. Thanks, Carrie (10/14/2008)

Response: i have a cutting torch, grinder to smoth edges. my band saw the blade wont stay on so the only other way to cut is with a sawsall how thick is the iron (10/14/2008)

Response: Thanks, I believe we hae that taken care of. I'm putting in a bid now and you will have to except it right away because we are leaving for Spokane very soon. Carrie (10/14/2008)