Roper Whitney hand brake 1018

Listing Information
Shipment Title:Roper Whitney ha...
Shipment ID: 716843440
Customer:Adam C.
Date Listed:4/24/2014 8:07 AM CST
Date Updated: 5/3/2014 12:38 PM CST
Ended: 5/4/2014 8:09 AM CST
Budget: Place Bid
# of Bids: 8 (0 Active)
Auction Goods:No
Shipment Pictures
Roper Whitney hand brake 1018
Origin, Destination, & Route Information
Origin
Residence
Pickup: Ready Now
Route

Est. Distance: 45.00 Miles
Destination
Residence
Delivery: ASAP
Heavy Equipment > Miscellaneous - Construction Click on Report a Violation to report a uShip rules violation
Roper Whitney hand brake 1018
Needs assistance loading: Yes
Total Weight: 2200 lbs
Needs assistance unloading: Yes
On a truck or trailer: No
Preferred truck or trailer type: Flatbed
Length: 11 ft 0 in. 
Width: 2 ft 0 in. 
Height: 4 ft 0 in. 
Weight: 2200 lbs
Measurements: Estimate (my best guess)
Additional Information: Going from one home garage to another home garage around 50 miles one way. We will be putting casters on to roll. Wench is a must with a low flatbed. Report a Violation
Questions for this Shipment Click on Report a Violation to report a uShip rules violation
Question:
4/24/2014
Did you have anyway to load and unload from my trailer?Report a Violation
Response: no, I would assume it would need a wench to pull up into truck and also a ramp.4/24/2014Report a Violation
Question:
4/24/2014
This will require a forklift rental at pickup and drop off. I placed my bidReport a Violation
Response: We are putting on caster wheels so all we need is a tow truck/flat bed with a wench4/24/2014Report a Violation
Response: I have a 16 foot trailer that sits about 18 inches off the ground. We could get it up on that I believe. With a come along or a winch.4/24/2014Report a Violation
Question:
4/25/2014
can you be available at the pickup point? should I be expecting a small delay well you put casters back on the machine? Thanks Wayne HoeyYourWayReport a Violation
Response: Yes I can be available at pick up point and drop point. I will be putting casters on it as well.4/25/2014Report a Violation
Question:
4/25/2014
If item will have casters, and there will be assistance to load and unload on both ends, can do this tomorrow for you. Let me know if available and meets criteria and we'll place formal bid.Report a Violation
Question:
4/25/2014
Hay we have a Comm. rollback can move this today could be in buford in about 2 hours to pick-up if you get back to me ASAP for $ 600.00 have it to you today .Report a Violation
Question:
4/26/2014
WHAT IS YOUR PRICE RANGE FOR THIS SHIPMENT, THANK YOU , JDReport a Violation
Question:
4/27/2014
I sent this this bid to a friend of mine (also a UShip member) that has a rollback in your area. Good luck. Report a Violation
Question:
4/27/2014
I have an enclosed trailer with full ramp and 12K winch. What size casters are you putting on it? Report a Violation
Response: I think 6 inch casters but no bigger than 8 inches. I have not gotten up there but will be going tomorrow and will know more later.4/27/2014Report a Violation
Response: And will they be the locking style casters or freewheeling?4/28/2014Report a Violation
Response: the are free wheeling 4/28/2014Report a Violation
Response: I can get this done for under $400 if that would work for you. With it on casters of course.4/28/2014Report a Violation
Response: would like to describe our time frame on this. I need to get this here in smyrna asap..like yesterday but with my work its hard to take the time. Since rain is in the area I was wondering if tomorrow afternoon is out of the question. 4/29/2014Report a Violation
Response: The earliest I could do it would be this weekend as I am still up north and have a load going to WVA tomorrow.4/29/2014Report a Violation
Response: hello again. Well I went up to buford to put casters on and I cannot get it lifted with out flipping it over. I will have actual pics of this item soon if needed. Do you have any suggestions or am I just out of luck?4/30/2014Report a Violation
Response: I have plenty of suggestions but they are all going to raise the cost. 5/1/2014Report a Violation
Response: yes i figured that. I was trying to get a bob cat with the forks but haven't heard from them yet. What are your suggestions.5/1/2014Report a Violation
Response: You could always lift it (one end at a time) with an engine hoist. Take a couple of 2X10's and put your casters on the, make the lengths about 48" wide for stability, than bolt the brake to the boards for transport.5/1/2014Report a Violation
Response: The engine hoist is a good Idea. The casters are mounted to 2x8 24" long to be attached to holes on base of machine. Do you have an engine hoist and willing to help this process and if so whats your cost?5/1/2014Report a Violation
Response: I do, but with labor and time I would be in the $800 range.5/1/2014Report a Violation
Response: IC and I don't blame ya for the price. Let me look around and see if I can rent one. Will you still be available for the weekend and if so whats the date and time frame you are on?5/1/2014Report a Violation
Response: I need to know ASAP as my bid expires this afternoon. I have other loads booked so I can not say for sure if I can delay those.5/1/2014Report a Violation
Response: I understand but would it take place this weekend. I have found a lift and will be going up to Buford tomorrow but I will only have the lift thru the weekend.5/1/2014Report a Violation
Response: Yes this weekend would work. Saturday is best. The brake will need to be ready to load or we will need to come to another arrangement.5/1/2014Report a Violation
Response: sounds good.. booking now.5/1/2014Report a Violation
Accepted Bid
Price Service Provider Service type  
$396
Accepted 5/1
5.0/5 | 65 reviews
None
0
$464
Expired 4/30
5.0/5 | 4 reviews
None
0
$602
Expired 4/28
5.0/5 | 4 reviews
None
0
$721
Declined
5.0/5 | 2 reviews
None
0
$931
Declined
5.0/5 | 2 reviews
None
0
$958
Declined
5.0/5 | 3 reviews
None
0