Listed in Category: Freight > Truckload, Flatbed

Freight Shipping Charges > Livestock panels

Listing Information

Shipment Title:	Livestock panels
Shipper:	5173 (2)
Date Listed:	5/15/2007 11:28 AM CST
Date Updated:	6/7/2007 10:03 AM CST
Expires:	6/4/2007 12:00 AM CST
Pricing:
# of Bids:	6
Auction Goods:	No

Shipment Pictures

Origin, Destination & Route Information Select any to report a uShip Rules violation

Origin Information
Merkel, Texas 79536
Type: Business (with loading dock or forklift)

Route Information
Common RouteTruck Miles (low bandwidth)
Estimate: 1,663.00 miles

Destination Information
Yuba City, California 95993
Type: Residence

Timeframe Information

asap

Shipment Description Select any to report a uShip Rules violation

Commercial Freight Listing Information

Livestock panels
Shipment Details: livestock panels
Packaging: N/A

Dimensions(s):74 at 6x20 and 27 at 6x12
Total Weight:22450 lbs

Preferred Truck or Trailer:flatbed
Special Permit Required:No

Questions for this shipment:

Question: You want a full truck? (5/15/2007)

Response: there are 74 panels that have 6 rails, they are 6 ft. high and 20 ft.long, they each weigh 245 lbs. and 27 panels that are 12 ft long and 6 ft high, they weigh 145 lbs. the total weight is around 22400 lbs. I don't know how much room that will take. Thank you for your time Rick. (5/16/2007)

Question: how thick are these panels? Will this fit on 1 truck? It looks like you would have to stack this 46 panels high? thanks jmckee with MLT Providers (5/16/2007)

Response: I believe the thickest posts are no more than 1-1/4" but they are vary heavy, I don't think you could hurt them no matter how they are stacked. Thank you for your time Rick (5/16/2007)

Question: I can find a driver for you. Will this be a driver no touch load and would you be able to unload over the weekend? thanks jmckee with MLT Providers (5/16/2007)

Response: I have a tractor to unload with and they will have a forklift to load. I am gone memorial weekend. Thank you Rick. (5/17/2007)

Question: will all this fit on a 45 ft flatbed (5/17/2007)

Response: The thickest posts are 1 1/4 at the most, There is 74 at 20 ft. and 27 at 12 ft. two stacks of 37 should be around 4 ft tall, with 3 sets of 9 12 footers on top the whole stack should be about 40'6" long 6 ft wide and 5 ft. high. and will weigh 22500 lbs thank you Rick. P.S. you may call the manufacturer if you would like to confirm this his name is Domingo at D.D. gates and panels thank you agian Rick. (5/17/2007)

Question: Would love to help you, could move in the 2750 range. What is your target date to load and unload. Thanx Kevin at a1driverschoice. (5/17/2007)

Response: The panels should be finished any day now,however I screwed up trying to get bids and now I have two different listings for the same thing and they both have bids on them and I don't know what to do about it. anyway I hope to have them next week. thank you Rick. (5/18/2007)

Question: hey rick, these can go on a flat bed 18 wheeler, by what you are telling me. lets go ahead and close this deal, what is your target price and ican see if i can work with you, please respond asap, thanks, chris (5/17/2007)

Question: hey, what happened to you? says you want these shipped asap, trying to get this done for you, need to let me know what you are thinking asap, thanks, chris (5/17/2007)

Response: The panels should be finished any day now, hopeing to ship next week,However I screwed up trying to get bids and ended up with two different listings for the same thing and I din't know what to do about it because they both have bids on them now, but I'm working on it thanks Rick. (5/18/2007)

Question: MY DRIVER IS GOING TO BE IN TEXAS, PROBALY MONDAY. NEED TO KNOW WHAT YOU ARE THINKING, THANKS, CHRIS (5/17/2007)

Question: 10-4, how can we close a deal on this shipment? (5/18/2007)

Response: Hello sir this is Rick again, I still have the problem with the two listings, and I hate to ask you this but if you put your bid on the other listing than I can close this one, because there is three other bids on the other one, however yours is still the lowest. I think I need to get rid of one of them before the uship cops come after me, If you have any ideas let me know. Thank you Rick. (5/19/2007)

Question: just cancel this whole listing, if someone has a bid in it will automatically send them a message that you cancelled this one, thanks, chris (5/20/2007)

Response: Ok I will cancel this listing, so you need to bid on the other one. thanks Rick. (5/20/2007)

Question: hi rick, we had to put my driver on another load that came available, as soon as i have him freed up or another i will bid. thanks, chris (5/21/2007)

Response: Hey this is Rick , the panels are ready, I need to know if you are going to bid or I have to except another offer. Thanks Rick (5/24/2007)

Question: can I still help you with this move? Thanks jmckee with MLT Providers (5/21/2007)

Response: Yes you can but you need to bid on it, the panels are ready to ship now. Thanks Rick (5/23/2007)

Question: I will get you a rate - please check this site often for updates. thanks jmckee with MLT Providers (5/23/2007)

Question: what price do you need to be at? I have someone willing to work with you on this for pick up on next Tuesday and delivery next Friday? Let me know thanks jmckee (5/23/2007)

Question: please reply if interested, the drivers will need to fill their trucks if you are not interested. thanks jmckee with MLT (5/23/2007)

Response: Hey this is Rick, I tried to contact you yesterday but I had internet problems sorry about that,anyway I was hopeing to get bids around 1800 to 2000$ but I may be a little off on that, but the panels are ready to go right now so I need to get this done. Thank you Rick (5/24/2007)

Question: Hi Rick, this driver is interested but I don't think he will go that low since this is a full load and will take up 40' of space. I could get you that rate if this was a partial load at 20' of trailer. I may be able to make this work for $2800 + uship fees. thanks jmckee with MLT Providers (5/24/2007)

Response: Hi jmckee this is Rick I don't know what the uship fees are but don't you have to put a bid up? and then how much are they(uship fees) let me know thanks Rick. (5/24/2007)

Question: for a move of this value I will need to fax you a credit application. Please let me know if you are interested our driver is available. thanks jmckee with MLT Providers (5/24/2007)

Question: Rick, if I place a bid will you accept it for this driver? Thanks Jmckee (5/24/2007)

Response: If it is the lowest bid I will and right now is. Thanks Rick (5/24/2007)

Question: I have bid on this twice and was declined - what do you really want to pay on this and I'll let you know if I can do it, pick up next week some time but flatbeds prices have gone up the past few weeks. I have not been able to contract hitorically reasonable pricing for a few weeks now. (5/25/2007)

Question: hey rick, chris here, i wont be able to get my driver there for another week, if you cant wait i understand, but let me know, thanks, chris (5/25/2007)

Response: I haven't got any more bids Chris, I'm still trying but your bid was still the lowest, my wife want's to know what's the soonest you could get them here? Thanks Rick (5/25/2007)

Question: Rick, my driver is available for Tuesday next week - I will bid if you will accept my offer thanks jmckee (5/25/2007)

Response: Hi jmckee this is Rick, hey I'm not realy sure how this works, if you bid a job and don't get it does that do something to your profile? I dont understand everything I know about this stuff. anyway there is another bid on there now if you want to check it out. Thanks Rick (5/25/2007)

Question: i wont be able to give a definate answer till tomorrow, thanks, chris (5/25/2007)

Response: Hi Chriss This is Rick, are your drivers back? and if so are you going to bid? Thanks Rick (5/29/2007)

Question: Hey Rick - this does not do anything to my profile. I am just quoting you a rate with our available driver. I will not post a bid until we agree that you are ready to ship and will accept my rate. If you are waiting for the lowest rate please let me know. You have this as shipping ASAP and that is what I was trying to get for you. I don't feel it is fair to bid a rate without a committed driver. I hope you agree. Let me know if you would be interested with our services. thanks jmckee with MLT Providers (5/25/2007)

Response: Hi jmckee this is Rick there is no reason for me not to take the lowest bid I can get, however Tomarrow morning I have to have a confirmed shipper, I extened the listing because the guys building the stalls are takeing alot longer than they said they would. Thanks Rick (5/29/2007)

Question: Yes i can do it Asap im heading that way to go on vacation so if u want we can work a deal out on shipping thanks (5/26/2007)

Response: Hi Sergio this is Rick, sorry I did not get back with you I was gone for the weekend, When do you plan to leave on your vacation? Thanks Rick (5/29/2007)

Question: HEY RICK, I HAVE A DRIVER WITH A 45 FT FLAT BED IN LA AREA, BUT I NEED TO GET HIM A LOAD TO GO YOUR WAY, HOW MUCH TIME DO WE HAVE? IF YOU HAVE TO GO WITH SOMEONE ELSE I UNDERSTAND, THANKS, CHRIS (5/29/2007)

Response: Hey Chris this is Rick with the livestock panels, Sergio flaked on me, uship took my deposit we set up a time and he never showed, the guys in Texas waited all day on saterday, and now nobody can get ahold of him by phone or e-mail and he will not return my calls. Anyway what I'm trying to say is how busy are you, I realy need those panels. give me a call or message (five three O) six seven three-nine six eight three. Thanks Rick (6/6/2007)

Question: HEY RICK, I AM GOING TO HAVE TO LET THIS GO AS MY DRIVER HAS TO BE IN COURT IN TAMPA ON JUNE 6, THANKS, CHRIS (5/29/2007)

Response: Hi Criss this is Rick, I'm taking the lowest bid I have by tomarrow morning, what would be the soonest you could get them here? Thanks Rick (5/29/2007)

Question: are you ready to pick up tomorrow? Do you have a driver confirmed or is this load still available? Thanks (5/29/2007)

Response: HI jmckee this is Rick yes the load is ready now, I do not have a driver as of 5/29 9:00 am thanks Rick (5/29/2007)

Question: not for 2 weeks, sorry, let me know , thanks, chris (5/29/2007)

Response: Hi Chriss Rick again, I don't think we can wait that long sorry about that but I do appriacate all your time and effort, i belive your old bid was the lowest one still, but I can't remeber what it was could you let me know just for kicks thanks Rick (5/29/2007)

Question: i think it was 2300.00 (5/29/2007)

Response: Hey chris this is Rick, any luck I don't know what to do now I'm thinking about relisting this shipment let me know thanks Rick. (6/7/2007)

Question: i can have it to u by sunday or monday the latest i was planing to leave thursday ill make u a deal on the price ill charge u 2200 and u pay u ship fees (5/29/2007)

Response: Hi sergio this is Rick, I don't know how this works, how do I pay them and how much is it? thanks Rick (5/30/2007)

Question: accept my bid and il will tell u from there thanks (5/30/2007)

Question: i think they charge for this loas like 82 dollars thanks (5/30/2007)

Question: i think they charge for 82 for the load thanks (5/30/2007)

Response: Sergio this is Rick what the hell is going on, you need to call me real soon whithin one hour or you will get some feedback from me that will not be pretty (6/6/2007)

Question: What i meant was when u accept my bid they should give u instructions on how to pay and stuff like thanks hope to do buisiness with you (5/30/2007)

Response: Sergio what the hell is going on, will you please let me know so I can get this done Rick (6/7/2007)

Bids on this shipment:

Bid	Bid Date	Service Provider	Service Type	Mode	Status / Reason	Details
$2,383	5/29/2007	sergio361 (0)	-not specified-	-not specified-	Accepted
$2,696	5/30/2007	sergio361 (0)	-not specified-	-not specified-	Cancelled by service provider
$2,800	5/29/2007	sergio361 (0)	-not specified-	-not specified-	Declined / Price too high
$3,087	5/18/2007	AmericanFreight (143 )	-not specified-	-not specified-	Declined / Price too high
$3,268	5/18/2007	applog (167 )	-not specified-	-not specified-	Declined / Price too high
$3,495	5/17/2007	AmericanFreight (143 )	-not specified-	-not specified-	Declined / Price too high

* All Bids are rounded up to the nearest dollar for display purposes

- about uShip
- member support
- media room
- jobs
- affiliates
- partners
- developers
- site map

Copyright © 2008, uShip, Inc. and its licensors. All rights reserved. Trademarks shown are the property of their respective owners. Use of this site constitutes acceptance of the uShip User Agreement and Privacy Policy.

ABOUT SSL CERTIFICATES