Listed in Category: Freight > Truckload, Flatbed

Crate Freight Shipping > DOALL 36" verticle band saw

Listing Information

Shipment Title:	DOALL 36" verticle band saw
Shipper:	gotham (3)
Date Listed:	2/10/2007 2:11 PM CST
Date Updated:	2/20/2007 4:04 PM CST
Expires:	3/2/2007 2:11 PM CST
Pricing:
# of Bids:	10
Auction Goods:	No

Shipment Pictures

Origin, Destination & Route Information Select any to report a uShip Rules violation

Origin Information
york, Pennsylvania 17402
Type: Business (with loading dock or forklift)

Route Information
Common RouteTruck Miles (low bandwidth)
Estimate: 267.00 miles

Destination Information
Millerton, New York 12546
Type: Business (without loading dock or forklift)

Timeframe Information

Flexible

Shipment Description Select any to report a uShip Rules violation

Commercial Freight Listing Information

DOALL 36" verticle band saw
Shipment Details: DOALL 36" verticle band saw V36
Packaging: unpackaged

Dimensions(s):78" x 36" x 76" tall
Total Weight:2000 lbs

Special Permit Required:No

Additional Information: http://www.hildebrandmachinery.com/05244.htm
If your truck had a crane or fork lift that would be helpful otherwise I will hire rigger to unload.

Questions for this shipment:

Question: Hello,Does this bandsaw have a base on it big enough to self stand with 2ins ratchit staps to secure it to the bed of the truck,or is it mounted on a pallet?Is there a forklift at the pickup address?I have a Tilt Bed truck that can do the job if you have a way of loading and unloading.I can cover it with a tarp in bad weather.Thanks,Ruez. (2/10/2007)

Question: Is there a forklift/crane on the pickup?If so and you can get something to unload on delivery, I can move this with my pickup for $700 just about anytime. (2/10/2007)

Question: Hi I am a retired mechanic who is use to this type of equiptment. Over 25yrs experience and two men to help me if need be. Check out my user profile and feedback and if you want I can pick up early this week. Thanks Brian the maxview (2/11/2007)

Question: What type of unloading equipment is available at the unloading site? Is there a forklift? Thanks, Greyhound. (2/11/2007)

Response: no unloading equipment. if necessary i could hire a rigger (2/11/2007)

Question: Hi just wondering if you found a shipper I am on the road to ny at the moment and could pick this up for you and deliver thereafter I have bid $700 door to door cod being okay with my no deposit required with no hidden fees. Let me know if I can assist you. Thanks Brian the maxview (2/11/2007)

Response: Hello-I'm trying to figure out a rigger to unload. I'll keep you in mind when I get going. (2/14/2007)

Question: Hello,I went on line with your shipment and that answered all of my questions.I will bid on your job.Thanks,Ruez. (2/11/2007)

Response: Hello-I'm trying to figure out a rigger to unload. I'll keep you in mind when I get going. (2/14/2007)

Question: Thank you for your quick response to my inquiry. A rigger would be necessary for unloading. Thanks, Greyhound. (2/11/2007)

Question: Hello: I can unload this to ground level for you . All I need to know is if it's on a PALLET or not ? We can do this for about the same price as you have been quoted so far . We will place a bid if this sound good to you. You can check our feed back and see we do a great job @ transporting equipment like this. Just let us know and we will take care of the rest for you! THANK YOU TJ/ Sky's The Limit Transport & Recovery (2/18/2007)

Response: it hasnt been palleted yet. i will call on tuesday to see if they can secure it to a pallet. i will let you know then. thanks (2/18/2007)

Question: if you have it on a pallet its find if you dont its still ok i have a heaveduty 24footer with a extended liftgate. (2/18/2007)

Question: I can move it on a pallet or not ! I just thought if it was on a pallet I can use a pallet jack to move it where you want it when we get it to you NOTY just in the parking lot ! Let us know and we will set you a bid for it. THANK YOU SKY's (2/18/2007)

Response: thanks for your response. a pallet seems easiest for me so I'll call this week and ask if they are willing to pallet it and I will let you know (2/19/2007)

Question: Hi, I am in your area now and I can get this to you fast. I can load amd unload so you would not need to hire a rigger. I have handled all types of machine shop equipment. Check out my feedback, and profile. Thanks, Brian uship user name themaxview. (2/19/2007)

Response: ok im sold. how are you going to unload it? (2/19/2007)

Question: Hi, we have a wide Varity of hydraulic jacks and other assorted equipment to unload. I can place it on a pallet jack after unloading if you have one for moving. Unloading it from the trailer to the floor will not be a problem, thanks Brian. (2/19/2007)

Question: Hi I am heading for NY on Tuesday let me know if I can be of assistance to your I am sure I can do this both promply and professionally. I have all the tools I need to load and unload. Let me know if you need my help. Looking forward to your reply.Thanks Brian the maxview (2/20/2007)

Question: Good morning I am currently mapping out my schedulde for the week let me know if you want to accept my bid of $599 and we can get this going for you. I hope I can help you with this I assure you I am a professional and can get this done no problem. Thanks Brian the maxvie (2/20/2007)

Question: Hi again I forgot to mention that I have two assistants here that will help me too so we are a team and can get this done both promply and professionally. Thanks again Brian the maxview (2/20/2007)

Question: Hi I rebid for $545 let me know if you need this done as I will be coming through your area to NY shortly. Thanks again Brian the maxview (2/20/2007)

Question: Hi this is Brian the maxview can I ask you what it would take to get your business I am leaving OH shortly and I want to work with you and am going to NY anyway. Please let me know. Thanks Brian the madview (2/20/2007)

Response: just to be clear how do you plan to unload the band saw? im a bit nervous about it because it is rather narrow and heavy and thus a bit unstable. also the table is a wider than the base and can be fragile. if you satisfy me that you can do this safely i will accept your bid of 545 and call the people who have the saw tomorrow morning (2/20/2007)

Question: Please excuse the typo I am sorry my username is Brian the maxview sorry my keybo is malfunction and thats what I get for rushing. (2/20/2007)

Question: It will not be a problem as I have loaded an unloaded mills and lathes many times as a mechanic and engineer. I have over 25yrs experience a variety of hydraulic equiptment to load and unoad with also have two men with me to help in the process. Let me know if we can help as we can pickup asap and head to NY where I will also be picking up some heavy equiptment after yours is dropped off to take back to TX. Thanks much Brian the maxview (2/20/2007)

Question: I have to pick a piece of cnc machine shop equiptment. I was planning on doing that early tomorrow once I do that I will be heading back to Texas and will not have room to transport your saw, I do have the option of picking up the other piece of equiptment later bottom line is I can still transport your saw I just need for you to accept my bid soon I need to know by early tomorrow. I have lots of experience as a rigger and can easily handle your bandsaw for you I transported many of these saws in the past and have not had any problems with them. Thanks, Brian the maxview (2/20/2007)

Bids on this shipment:

Bid	Bid Date	Service Provider	Service Type	Mode	Status / Reason	Details
$810	2/20/2007	TonyZ (1)	-not specified-	-not specified-	Declined / Accepted another bid
$545	2/20/2007	themaxview (28 )	-not specified-	-not specified-	Accepted
$550	2/20/2007	jmav (45 )	-not specified-	-not specified-	Declined / Accepted another bid
$600	2/19/2007	Skytl (21 )	-not specified-	-not specified-	Declined / Accepted another bid
$599	2/19/2007	themaxview (28 )	-not specified-	-not specified-	Cancelled by service provider
$700	2/15/2007	youcallwehaul (80 )	-not specified-	-not specified-	Declined / Accepted another bid
$650	2/11/2007	Greyhound (59 )	-not specified-	-not specified-	Expired
$599	2/11/2007	themaxview (28 )	-not specified-	-not specified-	Expired
$600	2/11/2007	RUEZ (30 )	-not specified-	-not specified-	Declined / Accepted another bid
$700	2/11/2007	themaxview (28 )	-not specified-	-not specified-	Cancelled by service provider

* All Bids are rounded up to the nearest dollar for display purposes

- about uShip
- member support
- media room
- jobs
- affiliates
- partners
- developers
- site map

Copyright © 2008, uShip, Inc. and its licensors. All rights reserved. Trademarks shown are the property of their respective owners. Use of this site constitutes acceptance of the uShip User Agreement and Privacy Policy.

ABOUT SSL CERTIFICATES