Question: DO YOU HAVE ANY IDEA WHAT THE OUTSIDE TO OUTSIDE OF THE FRONT TIRES ARE? I HAVE 80 INCH BETWEEN MY FENDER WELLS.............THANKS,JIM (12/4/2008)
Response: I have a similar truck three years newer (a 1969 model) and the distance is approx. 83 inches--a little too wide. (12/5/2008)
Response: Thanks for the response.Good luck,Jim (12/5/2008)
Question: how soon are you looking to get this done? I have been planning on making my fender wells so you would be able to drive over but may be after the first of the year If you could wait and if the bed could hold a car I would do it for your 750.00....Thanks,Jim (12/5/2008)
Response: The folks I purchased the truck from had owned the truck a long time (but did not use it much)and as part of the deal they agreed they could hold it a while. If we could do it no later than early January it would probably be OK. Also, you could haul a car on the bed which is 20 feet long as a piggy back if you wanted to. The important thing is that your trailer have ramps so the truck could be driven on since I don't think there is any ramp there. (12/5/2008)
Response: The trailer has a 35ft bed with ramps, Its a two car trailer it just has sheet metal fender wells. Behind the fender wells I have made it wider for dual wheel and boat trailers.If it is only 83" wide I and it runs I have used boards on on side and loaded them that way. but that was because the man listing the truck said it was 75" with and when your there you sure don't want to come home empty.So if for some reason i didn't get it done I could still make it work.........Jim (12/5/2008)
Response: Sounds like it could work. (12/5/2008)
Response: I will give it a week or so and if nothing pans out for you befor then I will accept your " Book It Now".......Thanks for the quick response,Jim (12/5/2008)