Listed in Category: Heavy Equipment > Crawler Tractor

1937 allis-chalmers model m

Listing Information
Shipment Title: 1937 allis-chalm...
Shipment ID: 626127973
Customer: Joanne J.
Date Listed: 6/22/2012 4:33 PM CST
Date Updated: 6/28/2012 9:46 AM CST
Ended: 6/27/2012 4:33 PM CST
Budget: Place Bid
# of Bids: 4 (0 Active)
Auction Goods: No
Shipment Pictures
Origin, Destination, & Route Information
Origin
Residence
Pickup: 6/23/2012 To 6/29/2012
Route

Est. Distance: 131.00 Miles
Destination
Residence
Delivery: 6/23/2012 To 6/29/2012
Heavy Equipment > Crawler Tractor Click on Report a Violation to report a uShip rules violation
1937 allis-chalmers model m
Needs assistance loading: Yes
Total Weight: 8000 lbs
Needs assistance unloading: No
On a truck or trailer: No
Length: 10 ft 0 in. 
Width: 10 ft 6 in. 
Height: 6 ft 0 in. 
Weight: 8000 lbs
Measurements: Exact (measured)
Additional Information: blade is 10'6"wide-rest of mach. is 6' Report a Violation
Questions for this Shipment Click on Report a Violation to report a uShip rules violation
Question:
6/22/2012
Does the machine run? Can the blade be removed or angled for transport? Thanks B.V.Report a Violation
Response: machine does not run.blade is non tilt.thanks6/23/2012Report a Violation
Question:
6/23/2012
Can the blade be removed for shipment? 10'6 wide will need special permits and can get extremely costly. Report a Violation
Response: the blade can be removed by loosening six nuts on either side-easily acessable.then the machine width drops to 72"6/23/2012Report a Violation
Question:
6/23/2012
Do they have a way to push it onto a trailer at the pick up site or do you need a trailer with a winch? Is it in a place you can get to it? Is the blade lifted of the ground? Sorry for all the questions but i just want to make sure what i'am getting into before i give another bid, thanks.Report a Violation
Response: you would need a trailer with winch.the blade can be raised by disconnecting two bolts that are easily accesable,thanks6/23/2012Report a Violation
Response: : Ok thanks. I will have to pass.6/23/2012Report a Violation
Question:
6/23/2012
Hi. this is mark from STANTON ENTERPRISES. I have a winch on my trailer to load the tractor, The tractor must roll freely and If I got to take the blade off to move it thats going to take time to do. my new bid is in.Report a Violation
Question:
6/23/2012
What kind of assistance does this need loading? Lifting assistance or just someone to drive it onto the trailer?Report a Violation
Bids on this Shipment
Price Service Provider Service type  
$1,450
Accepted 6/24
4.8/5 | 47 reviews
None
0
$698
Cancelled 6/23
5.0/5 | 14 reviews
None
0
$722
Cancelled 6/23
5.0/5 | 46 reviews
None
0
$1,622
Declined
5.0/5 | 14 reviews
None
0